5 Common Issues You May Have With Your Residential Oven

Wednesday, October 23rd, 2019
man and woman cooking with residential oven

Residential appliances like your oven are a necessary component to running your home smoothly. When this appliance breaks down, it can cause a lot of stress, especially if you need it for a party or a family dinner. There are some common issues you can have with your oven. It is important to know about these before this appliance stops functioning.

1. The oven light doesn’t work

Although this issue doesn’t make your oven stop working, it can still be a hassle. You can try to fix the issue by replacing the light bulb. If this doesn’t do the trick, the oven may have a faulty electronic control, light switch, or connection wire. You should never attempt to repair these components yourself. Contact a professional residential appliance repair technician instead.

2. The temperature is not correct

With this issue, your oven will either show that it is not heating to the preset temperature or it will under/overcook your food. This problem won’t stop you from using your oven, but it can be annoying. First, try recalibrating the temperature controls. The owner’s manual will tell you how to do this. If this doesn’t solve the problem, contact a residential appliance service company.

3. The oven won’t turn on

When this appliance won’t turn on, your first troubleshooting technique should be to make sure you don’t have multiple appliances on a single circuit. If there is power going to the oven but it still won’t work, there could be a few more things to consider.

  • Electric ovens: Bad controls, broken wires, and using the wrong amount of power can stop your oven from turning on.
  • Gas ovens: A faulty igniter, valve, or igniter can prevent your gas oven from turning on.

Because troubleshooting and repairing these appliances can be dangerous, it is best to leave this to the professionals when your oven experiences this issue.

4. The door does not open or shut

If your oven door won’t shut, you may need to replace a hinge. To do this, you will need to disassemble the door and possibly remove the side panel. If you need help, you can contact a repair technician.

Sometimes oven doors won’t open after running a self-cleaning cycle. If this happens to your unit, unplug it or shut down its power source at the circuit breaker. Reconnect the power and then move the door lock lever gently to see if it will open. If this doesn’t solve the issue, run another cleaning cycle for fifteen minutes, then shut it down. Wait for the oven to cool then attempt to open the door again.

5. The oven won’t self-clean

There are many problems that can cause your self-cleaning oven to fail. First, check to make sure the door lock is working properly. If this doesn’t fix the issue, the thermostat, thermal fuse, control board, or wiring could be faulty. You should call a professional to test and repair the oven if you think any of these could be the problem.

Residential appliance repair in Amarillo, Texas

If your oven isn’t working correctly, contact a professional as soon as possible. Allen’s Tri-State Mechanical in Amarillo, Texas has over fifty years of experience working with a large variety of brands in the Tri-State area. Our technicians are trained and certified to test, repair, and install your Residential Appliances safely and efficiently. You can reach us at (806) 376-8345 or Contact Us by email to learn more.